-------------------------------------------------------
---	LBA-C-100 Beam Analyzer
---	https://lightdiction.com
---	contact@lightdiction.com
---
--- 	Version Notes
-------------------------------------------------------


===========================================
V1.06 - 05/05/2025
Beam profile visualizer. Higher FPS, laser control, power density. Data saving is enabled
===========================================

----- 	GLOBAL DESIGN
	- We now have 2 tabs for measurement.
	- The green ROI visualization on the preview window is corrected.
	- Higher FPS, no bugs on display for image stacking.

----- 	LASER CONTROL
	- It is now possible to control the laser output directly in the software, if Pangolin BEYOND is started. The output will be sent in the first zone in BEYOND.

----- 	CAMERA SETTINGS
	- The stabilization slider can now be set to 0, to remove stacking.
	- By default, stacking is set when we switch between divergence and power tabs
	- "Uncap FPS" checkbox has been added. This reduce the camera ROI to have more FPS.
	- "Visualizer only" checkbox has been added. This is useful when doing alignment, when we are not measuring anything.

----- 	MEASURES
	- Power density has been added, on X, Y and Point density.
	- A Beam Profile visualizer has been added. This enables to see graphs of X Y cross sections.
	- It is now possible to save all data in files


===========================================
V1.04 - 26/03/2024
Power measurement - calibration improved
===========================================

----- 	CAMERA SETTINGS

	- The number of images used for stabilization can be changed.

-----	COLOR CORRECTION

	- A new color calibration has been implementer and can be adjusted by the user.
	- Any wavelength can be added for color correction.
	- A RED BOOST option has been added. It boosts the red color on display, to ease the alignment.

-----	POWER MEASUREMENT

	- Power measurement is now possible with the device. It requires a license to use it.

----- 	GLOBAL DESIGN

	- The global design of the software has been improved and suits better with small screen.


===========================================
V1.03 - 15/02/2024
Stabilization, div and alignment improved
===========================================

----- 	IMAGE DISPLAY

	- A stabilization has been implemented in order to have a clean image even when the laser is flickering.

----- 	COLOR CORRECTION

	- An accurate color correction has been implemented to have a clean RGB measurement at 445 / 520 / 635nm by default.

----- 	DIVERGENCE

	- The divergence could be under evaluated when the beam was under-exposed, this is now corrected.
	- R, G and B divergence are now diplayed in addition to the "All" divergence.

----- 	ALIGNMENT

	- The color shift has been corrected on the alignment, the green was slightly misaligned.

===========================================
V1.02 - 22/11/2023
Accurate RGB beam alignment implemented
===========================================

----- 	COLOR ALIGNMENT

	- A correction has been implemented to improve the accuracy for beam alignment.

===========================================
V1.01 - 20/11/2023
Auto-update implemented
===========================================

----- 	AUTO-UPDATE

	- Test and corrections on auto-update


===========================================
V1.00 - 18/11/2023
Initial version
===========================================

----- 	GLOBAL DESIGN

	- There's all you need